- CONTACT US
- SIGN UP
- LOCAL REPEATERS
- FM NET INFO
- PSK31 NET
- SLOW SPEED CW NET
- KANSAS HF NETS
- AREA FM NETS
- LOCAL HAMFESTS
- HAM REFERENCE
- MESSAGE BOARD
- INTRO TO HAM RADIO
- CLUB CALENDAR
- CLUB GEAR
- BUILDERS GROUP
- MEETING PRESENTATIONS
- CONSTITUTION & BY-LAWS
- OFFICERS & MEMBERS
- ECHOLINK INFO
- SEK MINING HISTORY SPECIAL EVENT SERIES
CHANGES TO CLEAN SCOOP CERTIFICATE REQUIREMENTS
We have had horrible cooperation from the weather for the first 3 events and our on the air time has been limited so the club decided to change the qualification for the certificate. Now you only need to QSL 5 of 7 of the Special Events to get the clean scoop certificate !!
Good Luck and 73 from SEKARC
Friday, April 15, 2016
SEKARC SS CW NET LIVES
The SEKARC SS (slow speed) NET is planning to restart again on Wednesday April 27 at 8:30 pm after the 2 meter net and on the second and forth Wednesday of each month there after. Depending on how this works out for everyone it may be adjusted later. The purpose of the net is practice for CW operators and to make us proficient if we ever have to use net controlled traffic.
It is a SLOW SPEED net and is designed for the new CW operator and those of us who need the practice or are just learning. Please try and keep your speed below 8 wpm. Our operating frequency will be between 7.057 and 7.058 MHz . I will try to use 7.057.5 but if it is busy QSY up or down between the above. Let's have a good time and use the equipment that works for you.
Step 1: Net Control (NC) calls "QRL? QRL?" to see if the frequency is in use. This is a good time to zero beat NCS's signal.
Step 2: Net Control calls "CQ CQ CQ SEKARC SS CW NET DE WD0CFH WD0CFH NC QNI K". That means it's time for stations to send their call signs to Net Control to copy. Our net is a slow speed net so please keep your speed under 8 words a minute.
Step 3: "LISTEN" for other stations first. When you don't hear anyone trying to check in, then send "DE <space> YOUR CALLSIGN". The space is important so that you can listen and make sure that you are not "doubling" with someone. If NCS misses your call he will ask "AGN ?" and you should resend your call.
Step 4: At the end of initial check in NC will acknowledge by repeating all calls. Example: "R R W0MQY ES KD0RTX ES N0WKZ AS". "AS" means standby, I will return later for your comments. NCS will again again call "QNI K" to pick up remaining stations who did not check in earlier.
Step 5: Wait for NC to call you again. Example: "W0MQY DE K0SEK KN". KN means NC is calling you and only you to make some comments. You can say "73" if you wish and end with "K0SEK DE W0MQY KN" if you have no comments.
Step 6: NC will call "QNI K" after a few comments to see if other stations wish to check in. If you have not yet been acknowledged by Net Control, keep trying until I hear you.
Remember: DE <space> "YOURCALLSIGN".
NC will call the entire list until everyone has had a chance to comment, giving more opportunities to QNI in between. Please be patient. If NC doesn't copy your call I will ask "AGN ?". You can then send your call again.
Step 7: NC will close the net after the last comment with "73 SEKARC SS CW NET IS NOW CLOSED DE WD0CFH NC SK"
That's it guys. This will be a whole new experience for me as NC and probably for a few more who have never checked into a net. We are a "slow speed" net so don't hesitate to ask "QRS" (slow down) if you are having trouble copying. No one is going to make more mistakes than ME.
Jack ... WD0CFH